查看完整版本: TL866CS升级TL866A的方法 英文版

shangdawei 发表于 2017-4-20 21:54:40

TL866CS升级TL866A的方法 英文版

Here's a quick guide to upgrading your TL866 programmer from the CS version to the A version.
This operation enables use of the ICSP port (which is easily soldered in).

**** Hidden Message *****

1: Install the Programmer's software in C:\MiniPro (I used the current version included in the .zip).
2: Plug in Programmer (hope you chose to install the USB driver in the above step).
3: Run Programmer Software and look at the very bottom line. It should show your version TL866CS.
4: Exit back to Desktop.
5: Run the TL866.exe program.
6: Click the browse button [...] and browse for your update.dat file in C:\MiniPro.
7: Select the "Firmware Dumper" button, and hit the "Reflash" button
8: Click "Advanced", then select "A Bootloader", then hit "Write"
9: Unselect "Code protection bit", then hit "Write"
A: Hit OK to exit that menu, then select "TL866A firmware" and hit "Reflash"
B: When reflash is done, hit "Reset", wait, and hit "Reset" again.
C: Exit the TL866.exe program.
D: Run Programmer software again, look at bottom line. It should say TL866A.
E: Have fun

Please note that I performed the above steps while I was typing this,
so I am quite certain everything is correct.

Edit: There are some confirmation prompts that I skipped here because they're obvious.
Just say "Yes" or "OK" on all such prompts.




喜欢电台 发表于 2017-4-20 22:42:57

感谢分享 学习了

dxalt 发表于 2017-4-21 11:32:52

东西不错,可惜看不懂。

jy11 发表于 2017-4-21 19:51:16

谢谢楼主分享。

ani 发表于 2017-4-22 17:55:25

感谢分享 学习了

dingwenlon 发表于 2017-4-26 00:04:40

看看是什么东西

bao1024 发表于 2017-4-28 09:56:39

我想看看怎么改,我有一个这样的编程器

yanluxin 发表于 2017-5-24 10:11:58

想学习一下,谢谢!

hewe_001 发表于 2017-5-28 13:13:11

在那下载那个updata.dat文件呀!

995zb 发表于 2017-5-29 14:03:27

太好了。谢谢分享
页: [1] 2 3 4 5 6
查看完整版本: TL866CS升级TL866A的方法 英文版