步进电机控制器电路 Stepper Motor Controller

liyf 发表于 2011-6-2 06:48:14

步进电机控制器电路 Stepper Motor Controller
I found this circuit in my files. I don't know where it came from, but it looks like I photocopied it from somewhere years ago. I have been told that it came from "The Robot Builder's Bonanza", by Gordan McComb. Anyway, I thought that it should be fairly useful, so I decided to post it here. The circuit is very simple and inexpensive. This is good thing because most commercial stepper motor controller ICs are quite expensive. This circuit is built from standard components and can easily be adapted to be controlled by a computer. If you use cheap surplus transistors and stepper motor, the price of the circuit can be kept to under $10.

Schematic

http://www.elecfans.com/article/UploadPic/2010-2/20102515305766489.jpg

Parts

Part

Total Qty.

Description

Substitutions

R1, R2 ,R3, R4

4

1K 1/4W Resistor

D1, D2, D3, D4

4

1N4002 Silicon Diode

Q1, Q2, Q3, Q4

4

TIP31 NPN Transistor (See Notes)

TIP41, 2N3055

U1

1

4070 CMOS XOR Integrated Circuit

U2

1

4027 CMOS Flip-Flop

S1

1

SPDT Switch

MISC

1

Case, Board, Wire, Stepper Motor

Notes
1. You should be able to substitute any standard (2N3055, etc.) power transistor for Q1-Q4.
2. Every time the STEP line is pulsed, the motor moves one step.
3. S1 changes the motors direction.

tcqinzh 发表于 2015-1-5 16:56:41

资料不错，感谢分享:)

robter 发表于 2015-10-9 20:32:45

这个很好，感谢楼主

页: [1]