DIY编程器网

标题: CA24064B (T6963c)keilc51示例程序 [打印本页]

作者: liyf 时间: 2012-1-27 19:45
标题: CA24064B (T6963c)keilc51示例程序



CA24064B (T6963c)keilc51示例程序

//                   CA24064
//***************************************************************************
//*  Create by :Ssmart 2004/12/01    KeilC V7.0                         *
//***************************************************************************
//连线表:  CPU=89C52                                                       *
//C/D=P2.0          /CE=P2.7          FS=P3.5       /WR=/WR /RD=/RD  *
//FOSC=12MHz       D0-D7=P0.0-P0.7    /RSET=/(CPU RSET)                *
//***************************************************************************
#include
#include
#include

#define uint  unsigned int
#define uchar unsigned char
#define Graphic          1
#define TXT          0
#define LcmLengthDots          240
#define LcmWidthDots          64

char xdata LcmDataPort _at_ 0x0000;
char xdata LcmCmdPort  _at_ 0x0100;
sbit FS = P3^5;
sbit Key= P3^4;

uchar code bmp1[];
uchar code str1[];

//指令&数据读写状态
void CheckRWCD(void)
{
   while((LcmCmdPort & 0x03) != 0x03);    //低电平忙
}
//数据自动写状态
void CheckAutoWrite(void)
{
   while((LcmCmdPort & 0x08) == 0);    //低电平忙
}
//屏读/屏考贝出错状态
void CheckScreen(void)
{
   while(LcmCmdPort & 0x40);    //1出错,0正确
}
//一个数据子写入函数
void LcmWriteData(uchar uData)
{
   LcmDataPort = uData;
}
//一个数据读出函数
uchar LcmReadData( void )
{
   uchar uData;
   uData = LcmDataPort;
   return uData;
}
//无参数指令写入函数
void LcmWriteCommand(uchar Command)
{
   CheckRWCD();                      //检测指令读写状态
   LcmCmdPort = Command;
}
//单参数指令写入函数
void LcmWriteCommandWith1Par(uchar Parameter,uchar Command)
{
   CheckRWCD();                      //检测指令读写状态
   LcmDataPort = Parameter;
   CheckRWCD();
   LcmCmdPort = Command;
}
//双参数指令写入函数
void LcmWriteCommandWith2Par(uchar Parameter1,uchar Parameter2,uchar Command)
{
   CheckRWCD();                      //检测指令读写状态
   LcmDataPort = Parameter1;
   CheckRWCD();
   LcmDataPort = Parameter2;
   CheckRWCD();
   LcmCmdPort = Command;
}
//LCM初始化函数
void LcmInit( void )
{
   LcmWriteCommandWith2Par(0x00,0x00,0x40);    //设置文本显示区首地址
   LcmWriteCommandWith2Par(LcmLengthDots/8,0x00,0x41);    //设置文本显示区宽度
   LcmWriteCommandWith2Par(0x00,0x08,0x42);    //设置图形显示区首地址0x0800
   LcmWriteCommandWith2Par(LcmLengthDots/8,0x00,0x43);    //设置图形显示区宽度
   LcmWriteCommand(0xA7);                //设置光标形状 8x8方块
   LcmWriteCommand(0x81);                //显示方式设置文本xor图形(异或)
   LcmWriteCommand(0x9C);                //显示开关设置文本开,图形开,光标闪烁关
}
//延时函数
void Delay(uint MS)
{
   uchar us,usn;
   while(MS!=0)                      //12M Crystal
   {
         usn = 2;
         while(usn!=0)
         {
               us=0xf2;
               while (us!=0){us--;};
               usn--;
         }
         MS--;
   }
}
//通过按键设定延时函数
void DelayKey(unsigned char HalfSecond)
{                            //Delay_key加入时间参数0.5秒一级
   unsigned int i;
   for(i=0;i 29)          //自动换行
         {
               x=0;
               y++;
         }
         PutChar(x,y,*str);
         ++x;
         ++str;
   }
}
//显示一副图片函数
void DisplayOneBmp(uchar *puts)
{
   uchar i,j;
   uint  X=0;
   LocateXY(0,0,Graphic);
   LcmWriteCommand(0xB0);                //进入自动写
   for(i=0;i<LcmWidthDots;i++)
   {
         for(j=0;j<LcmLengthDots/8;j++)
         {
               CheckAutoWrite();
               LcmWriteData(puts[X]);
               X++;
         }
   }
   LcmWriteCommand(0xB2);                //退出自动写
}
//反显一副图片函数
void ReverseOneBmp( void )
{                            //利用数据一次读写操作
   uchar i,j,X;          //只能对一段RAM取反
   LocateXY(0,0,Graphic);
   for(i=0;i<LcmWidthDots;i++)
   {
         for(j=0;j<LcmLengthDots/8;j++)
         {
               LcmWriteCommand(0xC5);    //读数据,地址不变
               CheckRWCD();
               X = LcmReadData();
               X = "X;
               LcmWriteCommandWith1Par(X,0xC0);
         }
   }
}
//屏读功能演示
void ScreenReadDemo( void )
{                            //利用屏读
                           //能对当前屏幕反显,包括合成内容(本函数仅读文本到图形)
                           //但是写入后的内容都在图形区
                           //可以将文本区内容读出以图形方式写到图形区
   uchar i,j,X;
                           //使用屏读屏考时候必须设置宽度为40(硬件已决定)
                           //所以如确定要用到屏读屏考的话最后初始化时就设40
   LcmWriteCommandWith2Par(0x28,0x00,0x41);    //设置文本显示区宽度=40
   LcmWriteCommandWith2Par(0x28,0x00,0x43);    //设置图形显示区宽度=40
   PutString(0,0,str1);                      //0,0不会受到宽度改变的影响
   for(i=0;i<8;i++)          //屏幕较慢,就以一行文本做演示
   {
         LcmWriteCommandWith2Par((0x28*i+0x800)&0xff,(0x28*i+0x800)/256,0x24);
         for(j=0;j<LcmLengthDots/8;j++)
         {
               LcmWriteCommand(0xE0);
               CheckScreen();
               CheckRWCD();
               X = LcmReadData();
               X = "X;
               LcmWriteCommandWith1Par(X,0xC0);
         }
   }
   //屏读需要一点时间,运行速度比较慢,运行过程中由于文本图形互补的关系,屏幕全黑
   LcmWriteCommand(0x98);    //关闭文本区看显示效果
   DelayKey(3);
   LcmWriteCommand(0x9C);    //恢复文本区显示
   LcmWriteCommandWith2Par(LcmLengthDots/8,0x00,0x41);    //宽度改回原值
   LcmWriteCommandWith2Par(LcmLengthDots/8,0x00,0x43);
   LcmClear(0);          //清屏
}
//显示点阵子函数
void DisplayDots(uchar DotByte,uchar n)
{
   uchar i,j;
   LocateXY(0,0,Graphic);
   LcmWriteCommand(0xB0);                //进入自动写
   for(i=0;i<LcmWidthDots/n;i++)
   {
         for(j=0;j<LcmLengthDots/8*n;j++)
         {
               CheckAutoWrite();
               LcmWriteData(DotByte);
         }
         DotByte="DotByte;
   }
   LcmWriteCommand(0xB2);                //退出自动写
}
//主函数
void main(void)
{
   uchar i;
   FS =0;
   Delay(60);
   LcmInit();
   LcmClear(0);
   while(1)
   {
         DisplayOneBmp(bmp1);    //显示一副图片
         DelayKey(3);
         ReverseOneBmp();          //反显当前图片
         DelayKey(3);
         LcmClear(0);          //清屏,此处不清屏可观察文本xor图形的显示效果
         for(i=0;i<8;i++)          //显示一屏字符串
               PutString(0,i,str1);
         DelayKey(3);
         LcmClear(0);
         LcmClear(0xff);          //全黑检测
         DelayKey(3);
         ScreenReadDemo();    //屏读演示,函数内包含了延时
         DisplayDots(0x55,1);
         DelayKey(3);
         DisplayDots(0xaa,1);
         DelayKey(3);
         DisplayDots(0x33,2);
         DelayKey(3);
         DisplayDots(0xcc,2);
         DelayKey(3);
         DisplayDots(0xF0,4);
         DelayKey(3);
         DisplayDots(0x0F,4);
         DelayKey(3);
   }

}

//代码区
uchar code str0[]= "ShenZhen_SunSon_Electronic_INC";//不能直接使用字符串
uchar code str1[]= {//"ShenZhen_SunSon_Electronic_INC";//因为6963字符库非规则的
0x33,0x48,0x45,0x4E,0x3A,0x48,0x45,0x4E,0x3F,0x33,0x55,0x4E,0x33,0x4F,0x4E,
//S  h e n Z h e n _ S u n S o n
0x3F,0x25,0x4C,0x45,0x43,0x54,0x52,0x4f,0x4E,0x49,0x43,0x3F,0x29,0x2E,0x23,0x00
//_  E l e c t r o n i c _ I N C /0
};
uchar code bmp1[]={
//********************************************************//
//***** 转换的文件：E:\!Program\!BmpSample\24064.bmp
//***** 源图形宽度 * 高度：240 * 64
//***** 调整后宽度 * 高度：240 * 64
//***** 字模格式：横向取模,冗余模式,字节正序,正色取模,
//***** 点阵转换时间：2004/12/ 3 8:25:40
//***** 位图点阵占用1920字节
//********************************************************//

0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x04,0xFF,0x80,0x00,
0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,
0x00,0x01,0x80,0x00,0x0E,0x00,0x00,0x06,0x60,0x00,0x04,0x10,0x80,0x00,0x33,0x00,
0x00,0x03,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x01,0x80,0x00,0x00,0x00,0x01,
0x80,0x00,0x1F,0x00,0x00,0x0C,0x30,0x00,0x1F,0x90,0x80,0x00,0x61,0x80,0x00,0x07,
0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x01,0xF8,0x00,0x00,0x04,0x01,0x80,0x00,
0x33,0x80,0x00,0x19,0x30,0x00,0x04,0x20,0x80,0x00,0x64,0xC0,0x00,0x0E,0x60,0x00,
0x00,0x00,0x00,0x04,0x07,0xB0,0x01,0xFF,0xFE,0xBF,0xFC,0x01,0x80,0x00,0x61,0xC0,
0x00,0x33,0x98,0x00,0x04,0x29,0x00,0x00,0xCE,0x60,0x00,0x1C,0x30,0x00,0x00,0x00,
0x06,0x01,0x4D,0xFF,0xE0,0x7F,0xFF,0xFF,0xFC,0x01,0x80,0x00,0xCC,0xE0,0x00,0x67,
0x98,0x00,0x05,0x46,0x00,0x00,0xCF,0x30,0x00,0x39,0x98,0x00,0x00,0x00,0x07,0xE6,
0xBB,0xFF,0xE0,0x3F,0xFF,0xFF,0xFC,0x01,0x80,0x01,0x8E,0x70,0x00,0x67,0xDC,0x70,
0x06,0x80,0x00,0x71,0xDF,0x30,0x00,0x73,0x8C,0x00,0x00,0x00,0x07,0x1C,0x7F,0xFF,
0xC0,0x07,0xFF,0xFF,0xFC,0x01,0x80,0x01,0x1E,0x38,0x00,0xCF,0xCD,0xFC,0x1C,0x7F,
0x01,0xFD,0x9F,0x98,0x00,0xE3,0xC4,0x00,0x00,0x00,0x18,0x79,0xEF,0xBF,0x80,0x01,
0xFF,0xFF,0xFC,0x01,0x80,0x01,0x3F,0x3F,0xFF,0xCF,0xCF,0x0E,0x04,0x41,0x03,0x87,
0x9F,0x9F,0xFF,0xE7,0xE4,0x00,0x00,0x01,0x08,0xE3,0xFD,0xC0,0x00,0x03,0xFD,0xFE,
0xFC,0x01,0x80,0x03,0x3F,0x1F,0xFF,0x8F,0xC4,0x07,0x04,0x41,0x07,0x01,0x1F,0x8F,
0xFF,0xC7,0xE6,0x00,0x00,0x00,0xE7,0xC5,0x5F,0x00,0x00,0x07,0xEB,0xFF,0xEC,0x01,
0x80,0x02,0x3F,0x0F,0xFF,0x0F,0xC4,0x03,0x04,0x41,0x06,0x01,0x1F,0x87,0xFF,0x87,
0xE2,0x00,0x00,0x00,0x17,0x1F,0xFF,0xC0,0x00,0x1F,0x37,0xF7,0xFC,0x01,0x80,0x02,
0x3F,0x00,0x00,0x00,0x07,0xE1,0x14,0x7F,0x04,0x3F,0x00,0x00,0x00,0x07,0xE2,0x00,
0x00,0x02,0xFE,0x3B,0xFB,0xE0,0x00,0xFF,0x37,0xFF,0x7C,0x01,0x80,0x04,0x00,0x08,
0x00,0x80,0x07,0xAD,0x88,0x41,0x0D,0xAF,0x00,0x08,0x00,0x80,0x01,0x00,0x00,0x01,
0xEC,0xEE,0xDF,0xF0,0x05,0xCF,0xBF,0xB4,0x80,0x01,0x80,0x06,0x00,0x24,0x01,0x20,
0x06,0xA9,0x80,0x00,0x0C,0xAB,0x00,0x24,0x01,0x20,0x03,0x00,0x00,0x03,0xD0,0xDF,
0xE1,0xF8,0x07,0xE7,0x77,0xC0,0x00,0x01,0x80,0x06,0x07,0xD0,0x00,0x5F,0x06,0xA9,
0x00,0x00,0x04,0xAB,0x07,0xD0,0x00,0x5F,0x03,0x00,0x00,0x01,0xA3,0xBE,0x70,0x7C,
0x13,0x6F,0xBF,0x80,0x00,0x01,0x80,0x0C,0x00,0x20,0x00,0x20,0x06,0xA1,0x00,0x01,
0x04,0x2B,0x00,0x20,0x00,0x20,0x01,0x80,0x00,0x12,0x5D,0xFE,0x38,0x38,0x39,0xEF,
0x9F,0x80,0x00,0x01,0x80,0x0C,0x03,0xC0,0x00,0x1E,0x02,0x03,0x0F,0x81,0x06,0x02,
0x03,0xC0,0x00,0x1E,0x01,0x80,0x00,0x12,0xEF,0x78,0x00,0x00,0x39,0xE7,0xBE,0x00,
0x00,0x01,0x80,0x0C,0x04,0x20,0x00,0x21,0x03,0x03,0x08,0x81,0x06,0x06,0x04,0x20,
0x00,0x21,0x01,0x80,0x00,0x00,0xCD,0xF0,0x00,0x00,0x00,0xE7,0xDE,0x00,0x00,0x01,
0x80,0x1C,0x09,0x90,0x00,0x4C,0x83,0x03,0x0F,0xBF,0xC6,0x06,0x09,0x90,0x00,0x4C,
0x81,0xC0,0x01,0x21,0x7B,0xE0,0x00,0x00,0x00,0x0F,0xE4,0x00,0x00,0x01,0x80,0x18,
0x0B,0xD0,0x00,0x5E,0x81,0x01,0x08,0x83,0x04,0x04,0x0B,0xD0,0x00,0x5E,0x80,0xC0,
0x00,0x01,0x9F,0xC0,0x00,0x00,0x00,0x02,0x80,0x00,0x00,0x01,0x80,0x18,0x09,0x90,
0x00,0x4C,0x81,0x81,0x08,0x83,0x04,0x0C,0x09,0x90,0x00,0x4C,0x80,0xC0,0x02,0x04,
0x3F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x18,0x04,0x20,0x00,0x21,
0x01,0x81,0x8F,0x85,0x0C,0x0C,0x04,0x20,0x00,0x21,0x00,0xC0,0x00,0xA4,0xF7,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x18,0x03,0xC0,0x00,0x1E,0x01,0x81,
0x88,0x85,0x0C,0x0C,0x03,0xC0,0x00,0x1E,0x00,0xC0,0x08,0x09,0x6E,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x18,0x00,0x00,0x00,0x00,0x01,0x81,0x88,0x89,
0x0C,0x0C,0x00,0x00,0x00,0x00,0x00,0xC0,0x01,0x11,0xBE,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x80,0x18,0x00,0x00,0x00,0x00,0x09,0x80,0x8F,0x91,0x08,0x0C,
0x80,0x00,0x00,0x00,0x00,0xC0,0x10,0x9D,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0x80,0x1C,0x80,0x00,0x20,0x0F,0xF1,0x81,0xC0,0x21,0x1C,0x0C,0x7F,0x80,
0x20,0x00,0x09,0xC0,0x0A,0xAB,0x6B,0x80,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x1C,0x7F,0xE0,0x7C,0x10,0x01,0x93,0xC4,0x81,0x1E,0x4C,0x00,0x41,0xF0,0x3F,
0xF1,0xC0,0x2D,0x77,0xBF,0xA0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x1C,
0x00,0x10,0x7C,0x00,0x09,0x93,0xC4,0x49,0x1E,0x4C,0x80,0x01,0xF0,0x40,0x01,0xC0,
0x16,0xB5,0xFF,0x1F,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x0C,0x40,0x00,
0x7C,0x0F,0xF1,0x03,0x88,0x46,0x0E,0x04,0x7F,0x81,0xF0,0x00,0x11,0x80,0x37,0xDB,
0x7F,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x0E,0x3F,0xE0,0x30,0x10,
0x09,0x03,0xC0,0x00,0x1E,0x04,0x80,0x40,0x60,0x3F,0xE3,0x80,0x3B,0x7F,0xBF,0xFF,
0xFF,0xE0,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x0E,0x40,0x10,0x30,0x01,0xF2,0x03,
0x80,0x00,0x0E,0x02,0x7C,0x00,0x60,0x40,0x13,0x80,0x3F,0xED,0xFF,0xFF,0xFF,0xE0,
0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x07,0x3F,0x80,0x68,0x06,0x02,0x01,0x80,0x89,
0x0C,0x02,0x03,0x00,0xB0,0x0F,0xE7,0x00,0x37,0xFF,0xFF,0xFF,0xF8,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x80,0x03,0x80,0x60,0xC8,0x08,0x06,0x00,0x83,0x09,0x08,0x03,
0x00,0x80,0x98,0x30,0x0E,0x00,0x3C,0x07,0xF0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0x80,0x03,0x80,0x10,0x84,0x00,0x0C,0x01,0x8D,0x7F,0xCC,0x01,0x80,0x01,
0x08,0x40,0x0E,0x00,0x3D,0xFF,0xF7,0xCF,0xFF,0xC7,0x83,0xE7,0x81,0xF8,0x00,0x01,
0x80,0x01,0xC0,0x03,0x83,0x00,0x0C,0x01,0x04,0x89,0x04,0x01,0x80,0x06,0x0E,0x00,
0x1C,0x00,0x3D,0xFF,0xF7,0x9F,0xFF,0xE7,0x87,0xC7,0x81,0xF8,0x00,0x01,0x80,0x00,
0xE0,0x1F,0x01,0xE0,0x3C,0x03,0x03,0x09,0x06,0x01,0xE0,0x3C,0x07,0xC0,0x38,0x00,
0x3D,0xFF,0xE7,0x9F,0xFF,0xE7,0x8F,0x87,0x83,0xFC,0x00,0x01,0x80,0x00,0xF0,0x3C,
0x00,0xE0,0xFC,0x03,0x0C,0x80,0x06,0x01,0xF8,0x38,0x01,0xE0,0x78,0x00,0x3D,0xFF,
0x87,0x9E,0x01,0xE7,0x9F,0x07,0x83,0xFC,0x00,0x01,0x80,0x00,0xFC,0x00,0x00,0x03,
0xF8,0x02,0x01,0xBF,0x82,0x00,0xFE,0x00,0x00,0x01,0xF8,0x00,0x21,0xEF,0xC7,0x9E,
0x01,0xE7,0xBE,0x07,0x87,0x9E,0x00,0x01,0x80,0x00,0xFE,0x00,0x00,0x1F,0xF0,0x02,
0x02,0xA4,0x82,0x00,0x7F,0xC0,0x00,0x03,0xF8,0x00,0x01,0xE7,0xE7,0x9E,0x01,0xE7,
0xFC,0x07,0x87,0x9E,0x00,0x01,0x80,0x00,0xFF,0xE0,0x0F,0xFF,0xE0,0x04,0x0C,0xA4,
0x81,0x00,0x3F,0xFF,0x80,0x3F,0xF8,0x00,0x01,0xE3,0xF7,0x9E,0x01,0xE7,0xFC,0x07,
0x8F,0x0F,0x00,0x01,0x80,0x01,0xBF,0xFF,0xFF,0xFF,0xF0,0x0E,0x01,0xBF,0x83,0x80,
0x7F,0xFF,0xFF,0xFF,0xEC,0x00,0x01,0xE1,0xFF,0x9E,0x01,0xE7,0xBE,0x07,0x8F,0xFF,
0x00,0x01,0x80,0x01,0x9F,0xFF,0xFF,0xFF,0xF0,0x0E,0x02,0xA4,0x83,0x80,0x7F,0xFF,
0xFF,0xFF,0xCC,0x00,0x01,0xE0,0xFF,0x9E,0x01,0xE7,0x9F,0x07,0x9F,0xFF,0x80,0x01,
0x80,0x01,0x0F,0xFF,0xFF,0xFF,0xF0,0x0C,0x0C,0xA4,0x81,0x80,0x7F,0xFF,0xFF,0xFF,
0x84,0x00,0x01,0xE0,0x7F,0x9F,0xFF,0xE7,0x8F,0x87,0x9F,0xFF,0x80,0x01,0x80,0x03,
0x00,0xFF,0xFF,0xFF,0xF0,0x0E,0x02,0xBF,0x83,0x80,0x7F,0xFF,0xFF,0xF8,0x06,0x00,
0x01,0xE0,0x3F,0x9F,0xFF,0xE7,0x87,0xC7,0xBC,0x03,0xC0,0x01,0x80,0x03,0x00,0xBF,
0xFF,0xBC,0xE0,0x0E,0x01,0x20,0x83,0x80,0x39,0xEF,0xFF,0xE8,0x06,0x00,0x01,0xE0,
0x1F,0x8F,0xFF,0xC7,0x83,0xE7,0xBC,0x03,0xC0,0x01,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
};


      [/td]
      [/tr]

欢迎光临 DIY编程器网 (http://diybcq.com/)