DIY编程器网

标题: mini universal programmer [打印本页]

作者: tps_star    时间: 2012-9-6 19:28
标题: mini universal programmer




mini universal programmer
作者: liyf    时间: 2012-10-9 17:59
the design is pdiusbd12+51+fpga,and two power
作者: tps_star    时间: 2012-10-9 18:23
this programmer pcb is simple but very good support chip
作者: tps_star    时间: 2012-10-9 18:25
Supports Over 7000 Common Microcontrollers , CPLD , FPGA , EPROM , EEPROM ,FLASH,GAL,NAND
40 Pin ZIF SOCKET
ISP Cable For ATMEL 89S5X, AVR, PIC
JTAG Cable For Xilinx FPGA and CPLD , ALTERA CPLD and FPGA
JAM and SVF Player For Programming JTAG Devices
Digital IC Tester For 7000/4000/SRAM
USB Powered (No Need For External Supply)
User Friendly Software For Win98/Me/XP/2000 Windows7 (32-64)،VISTA
Automatic Device Identification & Device Insertion Notification
Very Small and Portable
Lifetime Software Upgrade
Supports Intel Hex - bin - Svf - Xilinx Jed & bit Files
3.0V-6.5V Device Support - VPP form 0V - 25V
Fast USB Interface
Gang Option
Digital IC Tester
作者: liyf    时间: 2012-10-9 20:23
tps_star 发表于 2012-10-9 18:25
Supports Over 7000 Common Microcontrollers , CPLD , FPGA , EPROM , EEPROM ,FLASH,GAL,NAND
40 Pin ZI ...

you have schematic ?
作者: tps_star    时间: 2012-10-9 21:44
sorry not have
作者: tps_star    时间: 2012-10-10 16:58
you see programmer board same as this programmer
作者: lpkf2004    时间: 2013-2-27 23:36
Please upload TNM5000 programmer  (PICTURE)
作者: program    时间: 2013-2-28 10:03
we need the sch for the programmer.
作者: rtindia    时间: 2013-9-10 02:32
Thank you for sharing!
作者: liyanjun5199    时间: 2014-4-2 15:23
好复杂啊,用的元器件太多了。谢谢分享




欢迎光临 DIY编程器网 (http://diybcq.com/) Powered by Discuz! X3.2