标题: ADP-PIC12C5X/-S [打印本页] 作者: liyf 时间: 2013-9-8 06:11 标题: ADP-PIC12C5X/-S Adapter for programming PIC12C508 with an Hilo ALL07 Programmer and HILO ALL03 (Release V9.11 and V9.12) for Hilo All-07 use adapter file ampu3.exe (supports Microchip PIC12C508, PIC12C509, PIC12C508(JW), PIC12C509(JW), PIC12C671, PIC12C672, PIC12C671(JW), PIC12C672(JW), PIC12C508A, PIC12C509A, PIC12C508A(JW), PIC12C509(JW), PIC12CE518, PIC12CE519, PIC12CE518(JW), PIC12C519(JW), PIC12C673, PIC12C674.)
I have built my adapter by wiring 2 DIL8 socket in this way:
name A the socket you'll insert into the ALL07 DIL40 zif socket,
name B the socket you'll put the pic12c50x into
You have to wire:
A pin1 -> B pin4
A pin2 NC
A pin3 NC
A pin4 -> B pin8
A pin5 NC
A pin6 -> B pin6 (coincident)
A pin7 -> B pin7 (coincident)
A pin8 -> B pin1
If the wiring is correct, when you insert the A socket into the zif you
can verify that:
ZIF pin17 -> PIC pin4 ZIF pin24 -> PIC pin1
ZIF pin18 NC ZIF pin23 -> PIC pin7
ZIF pin19 NC ZIF pin22 -> PIC pin6
ZIF pin20 -> PIC pin8 ZIF pin21 NC
other explanation of the wiring :
Broches
PAC40 ---Support DIP8
17 --------4 MCLR/Pgm
18 --------NC
19 --------NC
20 --------8 Gnd/masse