DIY编程器网

标题: Experimental Board 1.3 for Series 1 FPGA Boards [打印本页]

---

作者: shangdawei    时间: 2014-11-26 09:57
标题: Experimental Board 1.3 for Series 1 FPGA Boards
http://www.ztex.de/usb-fpga-1/exp-1.3.e.html








Features

• Baseboard for USB-FPGA Modules 1.2, 1.11 and 1.15.
• High-efficiency switching regulators to generate the supply voltages
  
  • 1.2 V @ 8 A
  • 2.6 V @ 2.5 A
  • 3.3 V @ 2.5 A
  • Wide input range: 4.5 to 16 V
    
• I/O voltages VCCO_RIGHT / VCCO_IO and VCCO_TOP can be easily and independently set to 3.3V, 2.6V, 1.2V or to an external voltage.
• All I/O Ports available on a standard 2.54 mm (0.1 inch) grid via six 1x23 pin connectors to which Expansion Boards or Breadboards can be connected
• Downward pin compatible to Experimental Board 1.2 and Experimental Board 1.1
• JTAG interface for the FPGA
  

---

欢迎光临 DIY编程器网 (http://diybcq.com/)

Powered by Discuz! X3.2