USB-FPGA Module 2.16
http://www.ztex.de/usb-fpga-2/usb-fpga-2.16.e.htmlFeatures
[*]High-Speed (480 MBit/s) USB interface via Mini-USB connector (B-type)
[*]Cypress CY7C68013A EZ-USB FX2 Microcontroller (128 pin version)
[*]Two Xilinx Artix 7 FPGA variants: XC7A200T (stock type) and XC7A100T (on request), see Variants
[*]External I/O connector (consisting in two female 2x32 pin headers with 2.54mm grid) provides:
[*]100 General Purpose I/O's (GPIO) connected to FPGA
[*]JTAG signals
[*]Reset signal
[*]External power (4,5 V .. 16 V) input
[*]3.3V output
[*]I/O voltage output or input, see External I/O connector
[*]128 MBit on-board Flash memory
[*]Allows Bitstream loading from Flash to FPGA (up to 16.5 MByte/s)
[*]Accessible from EZ-USB FX2 and from FPGA, see the CPLD description
[*]Fast FPGA configuration via USB using CPLD: up to 24 MByte/s
[*]Memory mapped IO between EZ-USB FX2 and FPGA
[*]128 Kbit EEPROM memory (can be used to store the EZ-USB firmware)
[*]2 Kbit MAC-EEPROM: contains a unique non erasable MAC-address and is used to store firmware settings
[*]On-Board power supply:
[*]3.3 V: 2000 mA
[*]1.8 V: 1000 mA
[*]1.0 V; 14000 mA
[*]Heat sink for high performance / high speed applications, see Section heat sink
[*]Optional:
[*]Battery to store a key for bitstream encryption
[*]On-board JTAG connector
[*]Temperature range: 0-70°C
页:
[1]