El Cheapo PICmicro Programmer

liyf 发表于 2012-2-27 18:29:47

El Cheapo PICmicro Programmer

原理图

For different PICMicro Pinouts, the pins to connect (with sample    parts) are:

Signal8-Pin14-Pin18-Pin28-Pin40-Pin
------12C5XX16C50516F8416C7316C74
Vcc11152011,32
Gnd81458,1912,31
_MCLR44411
Data713132840
Clock612122739
Parts list for the "Version 3.10" Programmer
Bill of Materials
Part    Number

   R1
   R2-R5
   R3-R4
   C1
   C2, C4
   C3
   CR1
   CR2, CR3
   Q1
   Q2
   U1
   U2
   CR1
   J1
   J2
   --
   --
   --Value/Comments

   220 Ohms 1/4 Watt
   10K 10K Ohms 1/4 Watt
   1K Ohms 1/4 Watt
   10 uF 25 Volt Electrolytic
   0.1 uF 35 Volt Tantalum
   0.01 uF Ceramic
   5.1 Volt 1 Watt Zener
   IN914 Silicon Diode
   2N7000 NMOS FET
   2106a PMOS FET
   78L12 Voltage Regulator
   18 Pin IC Socket
   5.12 V/1 Watt Zener Diode
   2.5 mm Power Plug
   DB-25F Solder Cup Connector
   "Wall Wart", 14+ Volts Supply with2.5 mm Power Plug
   Prototyping Card/Breadboard
   6'"Straight Through" DB-25M to DB-25FDigi-Key    Part Number

   220QBK-ND
   10KQBK-ND
   1.0KQBK-ND
   P6248-ND
   P2053-ND
   P4922-ND
   1N4733AMSCT-ND
   1N4148DICT-ND
   2N7000P-ND
   ZVP2106A-ND
   LM78L12ACZ-ND
   A9318-ND

   CP-202B-ND
   125F-ND


   AE1012-ND
软件和调试工具

页: [1]