My new pc doesn't have a parallel port anymore so I couldn’t use the AVR programmer I made before anymore. That's why I decided to build one that works on a USB port.
The design is based on the USBtinyISP design from http://www.ladyada.net/make/usbtinyisp/index.html I removed the 6p connector from the circuit because I don't use that. And I've made a new print that is single sided.
雷达卡
发表于 2011-11-24 21:18:48
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
微信
收藏
分享
支持
反对
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2013-5-16 20:54:20
