请选择 进入手机版 | 继续访问电脑版

DIY编程器网

 找回密码
 注册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

查看: 1748|回复: 2

[资料] USB-FPGA Module 2.01

[复制链接]
发表于 2014-11-26 09:39:21 | 显示全部楼层 |阅读模式
http://www.ztex.de/usb-fpga-2/usb-fpga-2.01.e.html

usb-fpga-2.01-400.jpg

usb-fpga-2.01.png

Features
  • USB 2.0 interface with Mini-USB connector (B-type)
  • Cypress CY7C68013A EZ-USB FX2 Microcontroller (100 pin version)
  • Xilinx Spartan 6 XC6SLX16 FPGA (XC6SLX9 and XC6SLX25 on request)
  • External I/O connector (consisting in two female 2x32 pin headers with 2.54mm grid) provides:
    • 100 General Purpose I/O's (GPIO) connected to FPGA
    • JTAG signals
    • Reset signal
    • External power (4.5 V .. 16 V) input
    • 3.3V output
    • I/O voltage output or input, see External I/O connector
  • 128 MBit on-board Flash memory
    • Allows Bitstream loading from Flash to FPGA (up to 6.5 MByte/s)
    • Accessible from EZ-USB FX2 and from FPGA
  • 128 Kbit EEPROM memory (can be used to store the EZ-USB firmware)
  • 2 Kbit MAC-EEPROM: contains a unique non erasable MAC-address and is used to store firmware settings
  • On-Board power supply:
    • Power source selectable by jumper: USB or External I/O connector
    • 3.3 V: 2000 mA
    • 1.2 V; 1000 mA
  • Temperature range: 0-70°C




 楼主| 发表于 2014-11-26 09:49:41 | 显示全部楼层
usb-fpga-2.01-800.jpg
 楼主| 发表于 2014-11-26 09:50:05 | 显示全部楼层
usb-fpga-2.01-bot-800.jpg
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|文字版|手机版|DIY编程器网 ( 桂ICP备14005565号-1 )

GMT+8, 2024-3-29 06:30 , 耗时 0.096279 秒, 21 个查询请求 , Gzip 开启.

各位嘉宾言论仅代表个人观点,非属DIY编程器网立场。

桂公网安备 45031202000115号

DIY编程器群(超员):41210778 DIY编程器

DIY编程器群1(满员):3044634 DIY编程器1

diy编程器群2:551025008 diy编程器群2

QQ:28000622;Email:libyoufer@sina.com

本站由桂林市临桂区技兴电子商务经营部独家赞助。旨在技术交流,请自觉遵守国家法律法规,一旦发现将做封号删号处理。

快速回复 返回顶部 返回列表