USB-FPGA Module 2.01

shangdawei

http://www.ztex.de/usb-fpga-2/usb-fpga-2.01.e.html





Features

• USB 2.0 interface with Mini-USB connector (B-type)
• Cypress CY7C68013A EZ-USB FX2 Microcontroller (100 pin version)
• Xilinx Spartan 6 XC6SLX16 FPGA (XC6SLX9 and XC6SLX25 on request)
• External I/O connector (consisting in two female 2x32 pin headers with 2.54mm grid) provides:
  
  • 100 General Purpose I/O's (GPIO) connected to FPGA
  • JTAG signals
  • Reset signal
  • External power (4.5 V .. 16 V) input
  • 3.3V output
  • I/O voltage output or input, see External I/O connector
    
• 128 MBit on-board Flash memory
  
  • Allows Bitstream loading from Flash to FPGA (up to 6.5 MByte/s)
  • Accessible from EZ-USB FX2 and from FPGA
    
• 128 Kbit EEPROM memory (can be used to store the EZ-USB firmware)
• 2 Kbit MAC-EEPROM: contains a unique non erasable MAC-address and is used to store firmware settings
• On-Board power supply:
  
  • Power source selectable by jumper: USB or External I/O connector
  • 3.3 V: 2000 mA
  • 1.2 V; 1000 mA
    
• Temperature range: 0-70°C
  

shangdawei

shangdawei